Our furnaces feature two heating chambers that operate with separate heating zones and temperature settings.

A tubular frame and panels with louvres for air exchange are used to construct furnaces. General maintenance interventions are easier with a tubular system.

Heating muffles are made of resistance and unique, highly thermally efficient refractory insulating panels. Strong temperature changes can be handled by a special heating chamber made of stainless steel.

Due to belt movement, internal sliding blocks prevent chamber wear and tear. Water is used to cool the cooling chamber. The chambers are held together by a flange, and a nozzle on it allows gas to enter. In order to improve de-oxidation, two burners are placed in front of the tunnel's two ends.

FULL-equipped precious metal analysis lab

We provide you with all the technical equipment needed to equip your analytical laboratory. We cover the entire process chain with our high-quality components. Your advantage: you have a competent partner for all your laboratory technology and can benefit from our reliable service. 

Delmer Rolling mill is very effective for precise metals like gold, silver and copper.

its specifications are as below: 

Weight : 270 kg

Dimensions : 85 X 34 X 117 cm

Power supply :  1 H.P. / .75 KW. 1 Phase

Max. Roller Speed : 7.57 (M/Pm.)

Rolls Width X Diameter : 101 X 57

Wire Grooves From – To : 0.75 - 8

Max. Sheet Width Can Be Rolled : 60

Max. Apertures Of Rolls : 25

No. Of Half Round Grooves : 2

Depth per rotation of staring : 0.78

Pneumatic Pulsator 2E (60/40-60)

• Pulsation Type: Pneumatic, Alternate Pulsation
• Rate: 50/180 ppm
• Milking Ratio: 50/50, 60/40, 65/35, 70/30
• Operating System: Vacuum, 35/50 kPa

Other Features

• Surematch coupling system
• Retrofit air filtering system
• Internal parts 100% self-lubricating

MODEL 

SPECIFICATIONS:

•  Equipped with high precision strain gauge sensor system
• Built-in 8mm tempered safety glass.
• Capacity : 3Kg - 200Kg(scale in the state, it can
• be 0.3Kg – 200Kg)
• Division of weight : 50g
• Height measuring range: 0.80 – 1.95
• meter(division of height: 5mm)
• LCD display size : 105 X 69.5 mm(backlight)
• Height measuring & analyzing function
• Body fat, BMI(Body Mass Index), TBW(Total Body), Bone Weight & Kcal Measuring Function.
• Voice function
• Single set of data recording/checking function
• Automatic one-step, continuous weighing
• Auto-zero
• Low battery – load indicator

POWER SUPPLY

• Height (cm), weight (kg/lb)
• Body fat (%)
• BMI (Body mass index)
• TBW (Total body water)
• bone density 
• show & reads healthy status   (under-fat/ healthy/ over-fat)
• BMR (basal metabolic rate - kcal)

SPECIFICATIONS:

• Equipped with high precision strain gauge sensor system

• Built-in 8mm tempered safety glass.

• Capacity : 3Kg - 200Kg(scale in the state, it can be 0.3Kg – 200Kg)

• Division of weight : 50g

• Height measuring range : 0.90 – 1.95 meter(division of height: 5mm)

• LCD display

• With RS 232 port, can connect with computer

• Height measuring & analyzing function

• Measure the height with ultrasonic technology

• Voice broadcast function

• Automatic on-step, continuous weighing

• Auto-zero

Measuring function:

• Height ( cm ), Weight ( Kg / lb )

• Body fat ( % ), visceral fat

• BMI (Body mass index)

• TBW (Total body Water)

• Bone density

• Body age

• Shaw & reads Health status ( Under-fat / Healthy / Over-fat / Obese )

• BMR ( Basal Metabolic Rate - Kcal )

SPECIFICALLY FOR BUFFALOES

Liners are the only component of the milking machine that comes into close contact with animal teats, Liners need to be carefully selected for your target herd and machinery, and changed regularly. we offer a wide range of original liners developed to suit your herd udder morphology, in order to ensure maximum milking performance while preserving  tear health. Thanks to their special blends, liners adhere perfectly to the teat, ensuring vacuum stability and preserving udder health. We offer a wide range of liners made of high-quality materials that comply with foodstuff regulations and ensure maximum durability and hygiene during milking.

This original rubber liner is specifically designed and developed to best suit the special morphology of buffalo teats. It guarantees milking speed while respecting your health.

This oven has been specifically designed for the annealing of gypsums in the production process of casting precious alloys.

The particular design, the special construction features and the tested work cycle make it an innovative and precise tool that offers the customer the possibility to achieve the objectives described below:

absolute homogeneity in the internal temperature, which determines a considerable improvement in the baking of the gypsum, with a maximum temperature of 850 ° C, on request up to 1000 ° C.

accuration in the insertion of the cylinders-molds, ease in the internal cleaning.

cooking process controlled by a touch panel, complete with:

management of the automatic opening and closing of the fireplace during the cooking cycle _management of a resistance in the wax drainage pipe, which avoids the formation of plugs

air insertion management to increase combustion, excellent for wax processing _ management of a forced cooling to decrease the cooling time.

Technical Data

They are mainly used for full finishing treatments.

Roughing, grinding and polishing very small objects. These machines integrate the rotational speed of the main disc with the four containers rotating about their axis, but in the opposite direction of the main disc.

The combination of these movements, together with the distinctive shape of the [wear- and aging-resistant] polyurethane inner containers and the new "Swivel System", provides a clean appearance. 

Specifications : 

Description:

It is a versatile machine used for all wet finishing processes - roughing, sanding and polishing on jewellery pieces, all ferrous alloys, especially stainless steel.

The machine uses a vibration effect that is transmitted to the polyurethane tank by a vibrator of adjustable mass. Therefore, the materials placed inside the tank receive three types of movement:
centrifugal, helical and vibrating. Their combined action, in combination with water and abrasives (with liquid compounds or pastes) allows a higher level of finish to be achieved.

The cD series "ETNA"line includes a variety of continuous casting furnaces with crucible capacities ranging from 10 to 140 kg. A graphical interface and display assist the user in his task. A tubular frame and movable panel secure access to the machine body for simple maintenance. The profile drive system is made of aluminum, is fully cooled, and is powered by a stepper motor coupled to a planetary gear; it should be integrated with the casting chamber.

All of this system is closed by an easily removable cover: entry to melting equipment (Ceramic jacket, chain bushings, thermocouples) is very quick, minimizing replacement time. The cooling socket has been enhanced in accordance with the equipment so that The cooling socket has been refined in tandem with the equipment to provide the best potential performance.

The machine's heart is a mid-frequency system designed and constructed entirely by the Technical Opdel. These furnaces are frequently used for special profiles requiring a large quantity of metal to be melted. It can use accessories such as shears or saws to trim profiles and trays to cool them. In some cases, an additional tilting head can directly fill the empty crucible with liquid metal to minimize production slowdown.