Products

Our annealing furnaces are constructed of panels with Louvres for air exchange and a tubular frame. General maintenance interventions are easier with a tubular system.

Heating muffles are made of resistance and unique, highly thermally efficient refractory insulating panels. Strong temperature changes can be resisted by special stainless steel heating chambers.

Protection gas enters the chamber through nozzles. The de-oxidation process is improved by a burner placed in front of the chamber to prevent oxygen entry. Inside is a shovel made of stainless steel.

When annealing metal, you simply push the pale to the bottom of the cooling chamber and drop it into the water tub for instant cooling (or leave it lying in the cooling chamber to cool, taking some time). The tub's treated material is removed either manually or (optionally) with a pneumatic piston.

Our furnaces feature two heating chambers that operate with separate heating zones and temperature settings.

A tubular frame and panels with louvres for air exchange are used to construct furnaces. General maintenance interventions are easier with a tubular system.

Heating muffles are made of resistance and unique, highly thermally efficient refractory insulating panels. Strong temperature changes can be handled by a special heating chamber made of stainless steel.

Due to belt movement, internal sliding blocks prevent chamber wear and tear. Water is used to cool the cooling chamber. The chambers are held together by a flange, and a nozzle on it allows gas to enter. In order to improve de-oxidation, two burners are placed in front of the tunnel's two ends.

Delmer Rolling mill is very effective for precise metals like gold, silver and copper.

its specifications are as below: 

Weight : 270 kg

Dimensions : 85 X 34 X 117 cm

Power supply :  1 H.P. / .75 KW. 1 Phase

Max. Roller Speed : 7.57 (M/Pm.)

Rolls Width X Diameter : 101 X 57

Wire Grooves From – To : 0.75 - 8

Max. Sheet Width Can Be Rolled : 60

Max. Apertures Of Rolls : 25

No. Of Half Round Grooves : 2

Depth per rotation of staring : 0.78

SPECIFICATIONS:

• Equipped with high precision strain gauge sensor system.
• Built-in 8 mm tempered safety glass.
• Capacity: 3Kg - 200 Kg (scale in the state, it can be 0.3 Kg - 200 Kg).
• Division of weight : 50g
• Height measuring range : 0.80-1.95 meter (division of height : 5mm)
• LCD display size : 105 x 69.5 mm (back light)
• Height measuring & analysing function
• Body fat, BMI (Body Mass Index), TBW (Total Body Water), Bone Weight & Kcal Measuring Function
• Voice function
• Single set of date recording/ checking function
• Automatic on-step, continuous weighing
• Auto-zero
• Low battery - load indicator

POWER SUPPLY:

• Power by 4XAAA alkaline batteries or 6V- 15V DC power supply, before using, place open the battery cover to fix battery or plug in DC power.

SPECIFICATIONS:

• Equipped with high precision strain gauge sensor system

• Built-in 8mm tempered safety glass.

• Capacity : 3Kg - 200Kg(scale in the state, it can be 0.3Kg – 200Kg)

• Division of weight : 50g

• Height measuring range : 0.90 – 1.95 meter(division of height: 5mm)

• LCD display

• With RS 232 port, can connect with computer

• Height measuring & analyzing function

• Measure the height with ultrasonic technology

• Voice broadcast function

• Automatic on-step, continuous weighing

• Auto-zero

Measuring function:

• Height ( cm ), Weight ( Kg / lb )

• Body fat ( % ), visceral fat

• BMI (Body mass index)

• TBW (Total body Water)

• Bone density

• Body age

• Shaw & reads Health status ( Under-fat / Healthy / Over-fat / Obese )

• BMR ( Basal Metabolic Rate - Kcal )

MODEL 

SPECIFICATIONS:

•  Equipped with high precision strain gauge sensor system
• Built-in 8mm tempered safety glass.
• Capacity : 3Kg - 200Kg(scale in the state, it can
• be 0.3Kg – 200Kg)
• Division of weight : 50g
• Height measuring range : 0.80 – 1.95
• meter(division of height: 5mm)
• LCD display size : 105 X 69.5 mm(back light)
• Height measuring & analyzing function
• Body fat, BMI(Body Mass Index), TBW(Total Body), Bone Weight & Kcal Measuring Function.
• Voice function
• Single set of date recording / checking function
• Automatic on-step, continuous weighing
• Auto-zero
• Low battery – load indicator

POWER SUPPLY

• Height (cm), weight (kg/lb)
• Body fat (%)
• BMI (Body mass index)
• TBW (Total body water)
• bone density 
• show & reads healthy status   (under-fat/ healthy/ over-fat)
• BMR (basal metabolic rate - kcal)

This oven has been specifically designed for the annealing of gypsums in the production process of casting precious alloys.

The particular design, the special construction features and the tested work cycle make it an innovative and precise tool that offers the customer the possibility to achieve the objectives described below:

absolute homogeneity in the internal temperature, which determines a considerable improvement in the baking of the gypsum, with a maximum temperature of 850 ° C, on request up to 1000 ° C.

accuration in the insertion of the cylinders-molds, ease in the internal cleaning.

cooking process controlled by a touch panel, complete with:

management of the automatic opening and closing of the fireplace during the cooking cycle _management of a resistance in the wax drainage pipe, which avoids the formation of plugs

air insertion management to increase combustion, excellent for wax processing _ management of a forced cooling to decrease the cooling time.

Technical Data

They are mainly used for full finishing treatments.

Roughing, grinding and polishing very small objects. These machines integrate the rotational speed of the main disc with the four containers rotating about their axis, but in the opposite direction of the main disc.

The combination of these movements, together with the distinctive shape of the [wear- and aging-resistant] polyurethane inner containers and the new "Swivel System", provides a clean appearance. 

Specifications : 

Description:

It is a versatile machine used for all wet finishing processes - roughing, sanding and polishing on jewellery pieces, all ferrous alloys, especially stainless steel.

The machine uses a vibration effect that is transmitted to the polyurethane tank by a vibrator of adjustable mass. Therefore, the materials placed inside the tank receive three types of movement:
centrifugal, helical and vibrating. Their combined action, in combination with water and abrasives (with liquid compounds or pastes) allows a higher level of finish to be achieved.  

The cD series "ETNA"line includes a variety of continuous casting furnaces with crucible capacities ranging from 10 to 140 kg. A graphical interface and display assist the user in his task. A tubular frame and movable panel secure access to the machine body for simple maintenance. The profile drive system is made of aluminum, is fully cooled, and is powered by a stepper motor coupled to a planetary gear; it should be integrated with the casting chamber.

All of this system is closed by an easily removable cover: entry to melting equipment (Ceramic jacket, chain bushings, thermocouples) is very quick, minimizing replacement time. The cooling socket has been enhanced in accordance with the equipment so that The cooling socket has been refined in tandem with the equipment to provide the best potential performance.

The machine's heart is a mid-frequency system designed and constructed entirely by the Technical Opdel. These furnaces are frequently used for special profiles requiring a large quantity of metal to be melted. It can use accessories such as shears or saws to trim profiles and trays to cool them. In some cases, an additional tilting head can directly fill the empty crucible with liquid metal to minimize production slowdown.

The "Vulcano" series includes special machines that make metal shapes. These machines are designed to be easier to maintain and use.

There are two types of these machines: Vulcano 3000-5000 and Vulcano 7/12. The first type can be put on a bench and has a smaller space for melting metal. The second type is placed on the floor and can create larger shapes using a roll holder.

You can control the machine using a keypad with numbers on it. To get inside the machine, there's a frame and a moving panel that can be opened. This makes it simple to fix and clean the machine.

The machine uses a special motor to shape the metal. This motor is cooled down and works with the metal-shaping part of the machine. The machine is covered with a removable cover. This cover can be taken off easily to quickly reach the inside parts that need to be replaced or fixed.

There's a cooling system that helps the machine work better. The design of the machine also includes a way to protect it from gases. The most important part of the machine is the middle frequency system, which was created by the Technical Opdel Department.

The machine comes with a control panel that has buttons and a display. It heats up metal using electricity, and the way it pulls and shapes the metal can be adjusted. It also has a system to protect it from gases. The machine can be cooled down using water.

If you want extra features, you can get things like gas protection, support, a cabinet to hold things, and tools like a saw or a shear. If you choose the Vulcano 7/12 machine, you need to order a water tank to cool it down quickly.

The machine can work at a maximum temperature of 1400 degrees Celsius.

Description

Control Panel: There's a special keyboard with numbers.

Heating: It gets hot using electricity without making a noise.

Moving: The parts that move can be controlled to go fast or slow, and they have wheels and rollers to guide them.

Gas Protection: Gas is used to keep things safe inside.

Cooling: Special rings help cool the parts that shape the material.

Optional: You can add extra features like more gas protection, extra support, a cabinet for holding things, and tools like a saw or a cutting tool.

Water Tank: For one of the models, there's a tank for water that helps cool things down quickly.

Maximum Temperature: The hottest it can get is 1400 degrees Celsius.

Non deformable, long lasting, high quality and environmentally sustainable most suitable for walking areas, milking parlor, reception areas and corridors & small gardens.

They are non deformable, long lasting, high quality and environmentally sustainable most suitable for walking areas, milking parlor, reception areas and corridors & small gardens. Most useful in the areas where cows walk and move around to reduce jerks and impacts on their knees and legs.The Delmer Rubber Mats are certified by Fokus Test 08-376 for abrasion and slipping.

Cultivate Ventilation Framework
The high-volume low-speed maxi-fan permits a much way better discussion development in comparison with routine high-speed ceiling or mechanical floor fans which are frequently repulsive and troublesome. Customary high-speed fans are costly to function but they can't disseminate discuss to keep wanted temperatures from floor to ceiling.
In summer, discuss from a fan delicately passes over to keep a cooler more comfortable, and beneficial environment. In winter, the same fan pushes discuss from the ceiling down to the floor to keep a hotter environment.

Cultivate Revive Framework
Sprinkling and misting frameworks for dairy farms are one of the greatest issues confronted by dairy farmers. The least difficult way to keep the creatures cool is to take the creatures to a water body like a lake or a water stream and take off the buffaloes in water for at least 4 hours a day. A weight-boosting pump is introduced to create water pressure. A timer device is utilized to function the pump at a pre-configured time interim.

Revive framework is little spouts that create exceptionally fine water beads which look like haze or mist. These are moreover called sirs or fog systems. Most of these created beads vanish some time recently they can reach the ground. As they dissipate, they diminish the shed temperature.