Standard Weight & Weight Sets

  

 

• According to0IML
• R111 standard.
• Outstanding Cost Performance Ratio.
• Modem Calibration Methods Mow Exact Cofibrotion and higher accuracy.
• Calibrated by NPL / NAM / RRSL / DKO (Germany) / NVLAP / UKAS (UAS) Accredited.
• El to M1 Class Weight with or without certification.
• Material density of the weights is 8000kg / m'. air density is 1.2 kg / mi. and measuring temperature is 20°C.

• A balance can never be more accurate then the test weight. used toodjust it. it depends on itstoleronce.

Here's how to find the right test weight
• Just determine the number of digits specified for your weighing Instrument's resolution. then read off the particular accuracy Class that your test weight must hove on the graph provided below.
• The weight value of your test weight should be more than 80%of the mmimum capacity of your weighing instrument.

Example : Suppose your weighing instrument has o capacity of 2.200g and a Readability of 0.01g. This yields 220,000 digits, which correspond to o class E2 test weight. Since 80% of 2,200 g is 1.760g. you need to round toround it to ("weight value of 2.000g.

Model	LD 304C	LD 224C	LD 124C	LD 64C	LD 224	LD 124	LD 64
Capacity	301 g	220 g	120 g	60 g	220 g	120 g	60 g
Readablity	0.1mg	0.1mg	0.1mg	0.1mg	0.1mg	0.1mg	0.1mg
Repeatability(+/-)	0.1mg	0.1mg	0.1mg	0.1mg	0.1mg	0.1mg	0.1mg
Linerity(+/-)	0.2mg	0.2mg	0.2mg	0.2mg	0.2mg	0.2mg	0.2mg
Pan Size(mm/inch)	90θ/3.54θ