Precious Metal Refining

THIS SYSTEM REFINES 15 TO 120 KG OF COMMERCIAL SILVER (99.9%) IN 24 HOURS.
The modular system can be expanded at any time. One cell for approx. 15 kg of fine silver consists of the following ingredients:

275 l PP electrolytic cell for up to 10 anodes, each weighing 8 kg.
Polished stainless steel cathode
acid resistant fibre filter cloth
Training with scrapers
The system does not require any special maintenance and can operate continuously. The silver to be treated must be melted into the anode, then suspended in the anode holder. Silver purity should not be less than 70%.

About. 15 kg case size:
800 x 1065 x 1470mm.

Different sizes are available.

The process takes place inside a work tank which is placed strictly under the hood and under suction, housed also on the upper floor of the building structure. This will allow, with some modifications, to discharge the liquid of the saturated solutions, inside the crystallization system, which will be placed under them and therefore on the lower level. This crystallizer is wheeled and equipped with a Buckner filter for collecting gold salt.

The work tank will also be equipped with a movable lid, with tilting opening and connected separately to a reflux head in glass, for the condensation of the produced vapors, which will consequently be directed inside the tank to which they are bound. This system avoids decreases in volume in the tank and therefore negative variations in the concentration of the salt in solution, thus automatically guaranteeing the right final title.

Downstream of the process, a liquid treatment system is envisaged for immediate recovery of the residual gold.

Nowadays, waste causes a lot of pollution that can be harmful. But at Delmer, we turn e-waste into useful products.

We recycle e-waste and manufacture mining machines that help you mine gold. They are made with super high quality at a lower price that fits everyone's pocket.

The increase in global Technological Development has led to a dramatic increase in the generation of e-waste, creating challenges and opportunities in its recycling.

In this review, we focus on the basic value of metal resources in printed circuit boards commonly found in end-of-life electronic devices, and the difference between primary and secondary mining applications.

secondary as well as the diversity of metallurgical industries, particularly those with the potential for selective and sustainable gold recovery from PCB waste.

This is a very reliable and durable method that can be very useful for e-waste and can produce a useful product.

At Delmer, we offer products that can reduce pollution and benefit our customers. "BENEFITS OF RECYCLING TECHNOLOGY WASTE". According to research and practice, extracting minerals from natural deposits is 13 times more expensive than recovering them from technological waste to produce New equipment. Obtaining minerals like platinum, copper and palladium is not only about digging up and processing them, but also about using large amounts of water and energy to extract resources."

• No aqua regia.
• No cyanide.
• No corrosive/toxic gas/vapor. a gold alloy with a gold content of at least 55% is refined in a single step to produce pure gold with a purity of 99.99%.
• Processing time 6 to 8 hours.
• No need for gold in the electrolyte.
• No acid waste to handle.
• Low operating costs because the electrolyte is reused.
• Fully automatic process with process control.
• Patented process

FULL-equipped precious metal analysis lab

We provide you with all the technical equipment needed to equip your analytical laboratory. We cover the entire process chain with our high-quality components. Your advantage: you have a competent partner for all your laboratory technology and can benefit from our reliable service.