- Description
- Ask a question
- Review
After milking, proper udder care incorporates a post-dip solution, which is very necessary for the maintenance of cow and buffalo's udder.
This special treatment to the udder helps disinfect it and offers protection against any possible infections, thus making sure all hygiene practices are adhered to.
The effective udder disinfectant solution is able to reduce the risk of mastitis and other risks associated with the udder in cows.
It is, therefore, necessary that post-dip solutions are used to help in the promotion of udder health and the protection of milk quality, while at the same time contributing to good health for the dairy herd.
- Description
- Ask a question
- Review
Pre-dipping is an application of an effective udder disinfectant solution during the process of udder care of cows and buffaloes before milking.
This udder treatment helps clean the surface of the udder effectively so that its consequences for infections like mastitis do not occur.
Good udder health indicates the safety of milk produced as well as the quality.
Most importantly, pre-dipping regularly using dependable udder disinfectant plays a role in the general udder hygiene and well-being of the dairy herd.
- Description
- Ask a question
- Review
Pre-dipping is an application of an effective udder disinfectant solution during the process of udder care of cows and buffaloes before milking.
This udder treatment helps clean the surface of the udder effectively so that its consequences for infections like mastitis do not occur.
Good udder health indicates the safety of milk produced as well as the quality.
Most importantly, pre-dipping regularly using dependable udder disinfectant plays a role in the general udder hygiene and well-being of the dairy herd.
- Description
- Ask a question
- Review
THIS SYSTEM REFINES 15 TO 120 KG OF COMMERCIAL SILVER (99.9%) IN 24 HOURS.
The modular system can be expanded at any time. One cell for approx. 15 kg of fine silver consists of the following ingredients:
275 l PP electrolytic cell for up to 10 anodes, each weighing 8 kg.
Polished stainless steel cathode
acid resistant fibre filter cloth
Training with scrapers
The system does not require any special maintenance and can operate continuously. The silver to be treated must be melted into the anode, then suspended in the anode holder. Silver purity should not be less than 70%.
About. 15 kg case size:
800 x 1065 x 1470mm.
Different sizes are available.
SE AG 15 | SE AG 30 | SE AG 45 | SE AG 90 | SE AG 120 | |
Quantity per 24 hrs. approx. | 15 kg | 30 kg | 45 kg | 90 kg | 120 kg |
Power supply | 400 V three-phase | 400 V three-phase | 400 V three-phase | 400 V three-phase | 400 V three-phase |
Power | 4 kW | 6 kW | 10 kW | 12 kW | 18 kW |
Dimensions (mm) | 1600 x 1400 x 1600 | 2400 x 1400 x 1600 | 3200 x 1400 x 1600 | 6000 x 1400 x 1600 | 7600 x 1400 x 1600 |
Weight | 93 kg | 130 kg | 165 kg | 300 kg | 450 kg |
- Description
- Ask a question
- Review
This system can refine 15 to 120 kg of fine silver (99.9%) in 24 hrs.
The modular system can be expanded at any time. One cell for approx. 15 kg of fine silver consists of the following components:
- electrolyte tank 275 l in PP for up to 10 anodes each with 8 kg.
- cathodes made from polished stainless steel
- filter cloths made from acid-resistant fiber
- Drive with scraper
The system requires no special maintenance and can be operated continuously.
The silver to be processed must be melted to anodes which are then hung in the anode holder. The purity of the silver should not be below 70%.
Approx. 15 kg unit tank dimensions: 800 x 1065 x 1470 mm.
Different sizes are available.
SE AG 15 | SE AG 30 | SE AG 45 | SE AG 90 | SE AG 120 | |
Quantity per 24 hrs. approx. | 15 kg | 30 kg | 45 kg | 90 kg | 120 kg |
Power supply | 400 V three-phase | 400 V three-phase | 400 V three-phase | 400 V three-phase | 400 V three-phase |
Power | 4 kW | 6 kW | 10 kW | 12 kW | 18 kW |
Dimensions (mm) | 1600 x 1400 x 1600 | 2400 x 1400 x 1600 | 3200 x 1400 x 1600 | 6000 x 1400 x 1600 | 7600 x 1400 x 1600 |
Weight | 93 kg | 130 kg | 165 kg | 300 kg | 450 kg |
- Description
- Ask a question
- Review
THIS SYSTEM CAN CLEAN 15 TO 120KG OF COMMERCIAL SILVER (99.9%) IN 24 HOURS.
The modular system can be expanded at any time. One cell for approx. 15 kg of fine silver consists of the following ingredients:
275 l PP electrolytic cell for up to 10 anodes, each weighing 8 kg.
Polished stainless steel cathode
Acid-resistant fiber filter cloth
Training with scrapers
The system does not require any special maintenance and can operate continuously. The silver to be treated must be melted into the anode, then suspended in the anode holder. Silver purity should not be less than 70%.
About. 15 kg case size:
800 x 1065 x 1470mm.
Different sizes are available.
- Description
- Ask a question
- Review
THIS SYSTEM REFINES 15 TO 120 KG OF COMMERCIAL SILVER (99.9%) IN 24 HOURS.
The modular system can be expanded at any time. One cell for approx. 15 kg of fine silver consists of the following ingredients:
275 l PP electrolytic cell for up to 10 anodes, each weighing 8 kg.
Polished stainless steel cathode
acid resistant fibre filter cloth
Training with scrapers
The system does not require any special maintenance and can operate continuously. The silver to be treated must be melted into the anode, then suspended in the anode holder. Silver purity should not be less than 70%.
About. 15 kg case size:
800 x 1065 x 1470mm.
Different sizes are available.
SE AG 15 | SE AG 30 | SE AG 45 | SE AG 90 | SE AG 120 | |
Quantity per 24 hrs. approx. | 15 kg | 30 kg | 45 kg | 90 kg | 120 kg |
Power supply | 400 V three-phase | 400 V three-phase | 400 V three-phase | 400 V three-phase | 400 V three-phase |
Power | 4 kW | 6 kW | 10 kW | 12 kW | 18 kW |
Dimensions (mm) | 1600 x 1400 x 1600 | 2400 x 1400 x 1600 | 3200 x 1400 x 1600 | 6000 x 1400 x 1600 | 7600 x 1400 x 1600 |
Weight | 93 kg | 130 kg | 165 kg | 300 kg | 450 kg |
- Description
- Ask a question
- Review
The Difference in quality Ceramic supports implementation. Different Abrasive Shapes and Abrasives for different Abrasive effects on Abrasive materials.
- Description
- Ask a question
- Review
Dimension in mm / model | dG 005 |
Rolls width x diameter | 200 x 125 - 8" x 5" |
Max. width can be rolled | 150 |
Max apertures of rolls | 38 |
Max. roll speed | 16.0 (M/Min) |
Depth per rotation of staring | 0.99 |
Power supply | 7.5 H.P./ 5.62 Kw. |
Machine dimension in cm. | 120x51x165 |
Machine approx. weight | 700.00 kg |
- Description
- Ask a question
- Review
Rolling mill is used for finishing gold and silver plates. Roll cage Oversized will bear more the maximum load. Rollers are cooled by a water circulation system.
Rolls spacing a special transmission joint transmits full power to the rolls even when opened to 45mm.
Roll parallelism can be assured by two methods:
- Micrometer setting.
- Quick release gear. By means of a strong.
- Mini Rolling Mill
- Rolling Mills Hand Operated
- Rolling Mills Single Head
- Mini Rolling Mill Double Head
- Rolling Mills Combined Double Head With Gear Box & Electric
- Rolling Mill Single / Double Head Compact
- Rolling Mill Double Head (With Safety Grill & Cover)
- Strip Rolling Mill
- Description
- Ask a question
- Review
● Increases animal welfare & reduces stress
● Offers deep cleaning from head to toe, removes bacteria, parasites, old hair and skin scales
● Low energy consumption and high on milk production
● Being easy to install on wall or post, it is suitable for all sizes - big or small
● Suitable for 50 to 60 cows/sheep/goat & increases traffic
● Increases blood circulation, lowers clinical conditions and hence the vet cost
Motor
220 V-50 Hz - 30 Rpm - 0,18 kW
- Description
- Ask a question
- Review
Delmer’s RTS pipeline milking system significantly improves operator efficiency and milking speed.
Piping milking systems around the barn are designed to allow milking to take place in the barn and deliver milk directly to the large storage tank.
Working time is shortened compared to other milking solutions in associated stalls because there is no need for emptying operations.
We provide a suitable RTS pipeline for new or for:
Milking, pumping, cleaning, and cooling.
Our RTS milking and vacuuming lines, clusters, and milking units dramatically increase operator efficiency and milking speed within a week. Our efficient automatic cleaning system and rapid cooling of milk will help ensure that your milk is of TOP QUALITY.
KEY FEATURES:
- Four-bucket milking system
- SS 304 food grain milk pipeline with suitable size
- Special breast pump/vacuum for easier and faster massing
- Large capacity lugs for better milk flow
- Wide range of glass or stainless-steel receivers
- Description
- Ask a question
- Review
Liners are the only component of the milking machine that comes into close contact with animal teats, Liners need to be carefully selected for your target herd and machinery, and changed regularly. we offer a wide range of original liners developed to suit your herd udder morphology, in order to ensure maximum milking performance while preserving tear health. Thanks to their special blends, liners adhere perfectly to the teat, ensuring vacuum stability and preserving udder health. We offer a wide range of liners made of high-quality materials that comply with foodstuff regulations and ensure maximum durability and hygiene during milking.
Our original rubber liners are designed to be extremely adaptable, avoiding liner slippage and guaranteeing vacuum stability. A wide range of models are available to best meet your herd requirements.
Technical Specifications
Mouthpiece type | Round |
Mouthpiece lip diameter | 20 ÷ 25 mm |
Total length | 287 ÷ 320 mm |
Short milk tube diameter | 8 ÷ 11 mm |
Outer diameter | 17 ÷ 20 mm |
- Description
- Ask a question
- Review
Technical Details | Mod. | Mycro W-D |
---|---|---|
Internal cabin dimensions | mm | 425 x 295 x 330h |
Machine overall dimensions | mm | 430 x 520 x 415h |
Standard widia diameter nozzle | mm | 1,25 |
Working hand gun | n° | 1 |
Sand container capacity | kg | 1 |
Water container capacity | Lt | 1 |
Max working pressure | bar | 6 |
Power supply | Volt | 220 (50/60Hz) Single-phase |
Exhaust fan power | w | 100 |
Power consumption | kwh | 0,1 |
Max air consumption | Lt/min | 80 a 0.7 MPA |
Max water consumption | Lt/min | 0.05 a 0.7 MPA |
Weight | kg | 25 |
- Description
- Ask a question
- Review
Delmer Group is the most experienced, trusted, and highly rated Single End Beam Load Cell manufacturer and supplier for its excellent product quality, lowest price, and better customer support.
This model DPL4011606 is specially designed to suit harsh conditions like a weighbridge, it can work in different environmental conditions without any difficulty. This is made from high-quality stainless steel and high-quality raw materials. It is suitable for all large-capacity weighing applications. Customers can use different sizes with suitable capacities as the table below.
In addition, all the technical details about it are given in the table and figure below.
Characteristics:
- Alloy steel construction and sealed by welding to IP67 and IP68 standards. Full of capabilities and simple construction.
Applications:
- Electronic platform scale
- Vehicle weight
- Railway scales
- Tank scale
- Weighing hopper etc
- Description
- Ask a question
- Review
Rubber Vacuum Short Tubes
length : 21.7 cm
Set of 15 pieces of short tubes