English
Italian
Spanish
French
Russian
Bengali
German
Gujarati
Hindi
Kannada
Malayalam
Marathi
Nepali
Portuguese
Punjabi
Tamil
Telugu
Call us on :
12 prodotti
- Description
- Fai una domanda
- Review
Centrifugal separators work on the principle of centrifugal force. They contain a rotating drum that spins at high speed. When the mixture enters the drum, The Centrifugal force generated causes the denser components to move toward the outer edges of the drum.
Centrifugal separators present numerous advantages compared to alternative separation techniques, including filtration and sedimentation. They are capable of attaining high separation efficiency due to the substantial centrifugal forces produced. Their rapid separation capabilities render them particularly suitable for high-volume applications. Additionally, these separators can effectively differentiate mixtures according to their density. With a limited number of moving components, centrifugal separators are also straight forward to maintain and operate.
A centrifugal cream separator consists of the principal parts like the driving motor, axis,
separator bowl, cream spout,
skim milk spout, regulating float, faucet,and supply tank.
separator bowl, cream spout,
skim milk spout, regulating float, faucet,and supply tank.
Product Details:
|
Type
|
Semi automatic, Automatic
|
|
size
|
60 lph
|
|
Equipment Type
|
CREAM SEPARATOR
|
|
Tank Capacity
|
10 LTR
|
|
Capacity
|
60
|
|
Machine Body Material
|
SS & MS
|
|
Usage/Application
|
Milk
|
|
Minimum Order Quantity
|
1
|
- Description
- Fai una domanda
- Review
Capacity – 100LTR - 5000LTR available.
Bulk Milk Cooler 2000 Litres:
●Bulk Milk Cooler 2000 Litres model direct expansion cooling tank (Open Type Horizontal/Semi Cylindrical Shape) capacity 2000 Litres has large opening lids for easy access and rounded internal corners, to facilitate thorough cleaning.
Tank insulation is provided by factoryinjected polyurethane foam of 50 mm.The integral condensing unit is Hermetic Type with R22 refrigerant
Having Features of:
Having Features of:
■Running Cost is Low
■Milk Hygiene is a High Standard
■Reduced Electricity consumption
■The Agitator is on/off
■Cooling is on/off
■Digital Temperature Display
■35° C to 4° C within 3 hours for 1st milking 10° C to 4° C within 1.5 hours for the 2nd milking
■Condensing unit hermetic, 220/415V Single Phase / 3-Phase, 50 Hz supply
●Function: The Bulk Cooling Unit will be used to cool raw milk from the ambient temperature of 35° to 4° C within the specified time as laid down by ISO 5708 Class 2A-II Standards.
●Two Milking design systems have been configured such that the volume of each milking is as under :
■Milking in the Morning – 50% (1000 LTR)
■Milking in the Evening – 50% (1000 LTR)
●Please note that the minimum milk should be 500 LTR for proper functioning(BMC).
●Maximum Cooling Time is :
■First Milking: 3.0 hr. from 35° to 4° Celsius
■Second Milking: 1.5 hr. from 10° to 4° Celsius
Features:
A) Milk Cooling Tank
Open design with a spring assisted hinged lid to be provided for easy access forcleaning and visual inspection. The tank will feature a cylindrical design, incorporatingacondensing unit positioned beneath it. It will consist of a double shell made of AISI 304stainless steel, finished to a special ground texture of 150 grit. The tank's base will be equipped with a dimple evaporator, constructed from AISI 304 stainless steel utilizing laser welding techniques. The inner shell will have a thickness of 2 mm, while the outer shell will measure 1.5 mm. Insulation will be provided by CFC-free injected polyurethane foam, with a minimum density of 40 kg/m³, ensuring no imperfections or hygroscopic properties,and a thickness of 50 mm by ISO 5708 Class 2A-II. Included accessories will consist of an agitator and an outlet.
B) Refrigeration System
Mounted on a skid comprising of the following:
Hermetically sealed compressor complete with drive motor Air-cooled, screenprotected compact condenser unit comprising finned condenser coils in several rows. A single assembly of evaporating coils was affixed to the interior of the tank and integrated into a suitably sized channeling plate. The unit is provided fully equipped with an initial charge of environmentally friendly refrigerant and lubrication oil.
Onset Refrigeration system controls field mounted comprising of a solenoid valve,L.P/ H.P. cutout, and sensor for digital temperature indicators.
C) Control Panel
The refrigeration control panel, along with the milk tank control panel,will beconstructed from 1.2 mm thick AISI304 stainless steel. It will feature a temperature display andcontrol interface, complete with a switch for on/off functionality. The control panel is designed for mounted installation and is pre-wired for terminal connections.
- Description
- Fai una domanda
- Review
Capacity - 100LTRS - 2000LTRS Available
The churning barrel and beaters will be constructed from stainless steel that meets AISI Standards. The design of the beaters must guarantee an even distribution of salt and moisture throughout the operational phase - 1 unit.
The Machine, Hand Blender or Mixer for the Preparation of Buttermilk, Lassi,Cream,Curd, Idli,and Butter Churning.The drive configuration will include a reduction gearbox and a 1 horsepower electricmotor,resulting in a butter churn operating at 40 revolutions per minute.
Accessories:
SPRAY PIPE: A stainless steel spray pipe will be installed above the churn to facilitate the spraying of chilled water during the operation of the churn.
The spray pipe's inlet willconcludewith a complete stainless steel
union. - 1 No.
The spray pipe's inlet willconcludewith a complete stainless steel
union. - 1 No.
DOOR: A leak-proof hinged door made of stainless steel will be equipped with a secure locking mechanism. This door will be lockable in both the open and closed positions and will feature a synthetic rubber gasket that meets dairy standards. - 1 No.
BUTTERMILK DRAIN: A 25mm diameter stainless steel buttermilk drain, complete with a blank union, will be provided.
AIR RELEASE COOK: This component will be of the press operable type.
ENDFLANGES:The end flanges will be constructed from steel and reinforced with appropriate steelpads to facilitate coupling to the gearbox on one side and to the bearingon the other side.
PAINTING: All mild steel components of the butter churn will undergo a painting process that includes a coat of epoxy primer, followed by two coats of epoxy paint of an
approved shade, after thorough de-rusting.
TESTS: The following tests will be performed at our facility: - Water fillup test of the churn to ensure water tightness.
GENERAL NOTE: The drive machine will be installed on either the right or lefthand side.
Written approval for the right-hand or lefthand configuration will be obtained from your office prior to the installation of the drive machine on the churn drum.
Product Details:
|
Capacity
|
100Ltr- 1000Ltr
|
|
Machine Body Material
|
Ss.Aluminium
|
|
Design Type
|
Standard, Customized
|
|
Automation Grade
|
Yes
|
|
Grade
|
304
|
|
Phase
|
Single/three
|
|
Voltage
|
220v
|
|
Application
|
Butter making
|
|
Finishing
|
Mirror
|
- Description
- Fai una domanda
- Review
The paneer press machine is designed for the production of Paneer, Cheese from coagulated milk.
Our Paneer press machine is designed by a team of skilled professionals utilizing innovative, globally recognized technology. This cheese press is highly regarded for its exceptional tensile strength and robust construction, as it is produced using topquality materials.We take pride in providing a highquality pressing machine that meets industry standards and has been rigorously tested against various parameters.We offer a diverse range of machines with different specifications tailored to meet the specific needs of our clients.
This machine is equipped with several features, including:
- Exceptional reliability
- Robust construction
- Extended lifespan
- Accurate dimensions
- Abrasion-resistant
- Superior performance.
We adopt a client-specific and quality-focused strategy in providing a diverse selection of this machine. It is designed to press Paneer in accordance with the desired moisture content and texture. This press is particularly effective for pressing Paneer derived from coagulated milk.
Our press is in high demand within the Dairy-industry, tailored to meet thespecification of our clients. We offer press machines in a variety of capacities, sizes, weights,and models, ensuring that clients have optimal choices available. We prioritize dimensional accuracy and superior performance to guarantee the machine's longevity.
Product Details:
|
Name
|
Paneer Press Machines
|
|
Automatic Grade
|
Manual
|
|
Design Type
|
Customized
|
|
Automation Grade
|
Automatic
|
|
Electricity Connection
|
Single Phase
|
|
Power Source
|
Electric
|
|
Machine Body Material
|
SS, Aluminium
|
|
Equipment Type
|
Paneer Press
|
|
Production Capacity
|
Upto 100 kg
|
|
Brand
|
Creature Industry
|
|
Warranty
|
1 Year
|