Call us on : 
- Description
- Ask a question
- Review
Delmer MB-Series Halogen Moisture Analyser
The Delmer MB-Series is a range of halogen-heated moisture analysers for measuring sample mass loss during a controlled heating process and calculating moisture content according to the instrument's method. Model choice depends on sample mass, moisture range, material behaviour, required reporting increment and the test method. Results are method-dependent; validate settings for the material and intended use.
Listed model specifications
| Model | Capacity | Mass readability | Moisture display increment | Repeatability, 2 g sample | Repeatability, 10 g sample |
|---|---|---|---|---|---|
| MB 40 | 40 g | 1 mg | 0.001% | 0.1% | 0.03% |
| MB 50 | 50 g | 1 mg | 0.001% | 0.05% | 0.02% |
| MB 120 | 120 g | 1 mg | 0.001% | 0.05% | 0.02% |
| MB 200 | 200 g | 1 mg | 0.001% | 0.05% | 0.02% |
| MB 54 | 50 g | 1 mg | 0.0001% | 0.005% | 0.015% |
Listed pan diameter: 95 mm for the range. Confirm model-specific specifications against the current datasheet before ordering.
Applications for moisture testing
- Incoming-material inspection and routine quality control
- Food and agricultural materials, powders and granulates, where a validated method is appropriate
- Chemicals and industrial raw materials
- Research and process checks that require repeatable moisture-content measurements
These are potential application categories, not a guarantee that every material can be tested with the same settings. Heat-sensitive, volatile, crust-forming or chemically reactive samples may require a different method or specialist safety review.
How to choose an MB-Series model
- Confirm sample mass: keep the expected sample within the model's listed capacity and the method's recommended sample size.
- Define reporting needs: distinguish mass readability from the moisture display increment and from method accuracy.
- Validate temperature and time: establish a suitable heating profile and endpoint for the specific material; do not rely on one generic programme for all samples.
- Check repeatability: compare the listed repeatability conditions with your sample mass and acceptance limits.
- Confirm documentation and connectivity: request details of temperature range, timer, endpoint modes, data output, calibration, software and included accessories for the exact model.
Good moisture-testing practice
Prepare a representative, homogeneous sample; use consistent sample mass and distribution; keep the sample pan clean; avoid unnecessary exposure to ambient humidity; and document the method, temperature, endpoint and sample preparation. Compare results with an appropriate reference method during method development or where required by the quality system.
The displayed increment is not the same as method accuracy. Repeatability depends on model, sample mass, sample properties and test conditions. The listing does not imply automatic compliance with a particular food, pharmaceutical or industrial standard.
Frequently asked questions
What does a halogen moisture analyser measure? It estimates moisture content from mass change during heating according to the configured method; the result depends on sample preparation and test settings.
Which model should I select? Compare capacity, moisture display increment, sample mass and repeatability. Confirm the datasheet and test method for the exact model.
Can it test food, feed or pharmaceutical samples? It may be used where the method is suitable and validated for the material. Verify relevant safety, quality-system and regulatory requirements before routine testing.
What details help Delmer recommend a configuration? Provide the sample material, expected moisture range, typical sample mass, target test time or throughput, required method and destination country.
Explore the Delmer Laboratory & Jewellery Scales collection or contact Delmer Group for model selection, current datasheets and a quotation. International delivery and support options should be confirmed for your destination.
